The ExOne Metal Designlab™ by Rapidia is made possible with innovative HydroFuse™, an innovative water-based paste containing metal or ceramic powders.
Invented by Rapidia Founder Dan Gelbart, a serial inventor and entrepreneur, as well as a popular YouTube personality, his technology revolutionizes the speed, simplicity and affordability of metal 3D printing. First unveiled in 2019, and developed over several years, HydroFuse replaces 98% of the binder with water, an environmentally friendly solution that simply evaporates while printing, allowing parts to go directly into the furnace.
Unlike parts made on competing bound metal systems, no chemical or lengthy thermal debinding is required. That means this technology eliminates the need for a debinding unit and also shortens sintering times not just by hours but by days. The ExOne Metal Lab by Rapidia is a true Print Today, Parts Tomorrow innovation.
The original two-step bound metal printing process. Eliminates chemical or lengthy thermal debinding requirements, driving final part delivery times to a simple overnight sintering.
Go ahead: Print any part thickness. Unlike competing systems that require chemical or thermal debinding, and limit the thickness of 100% solid (no infill) parts for successful debinding, the ExOne Metal Designlab allows you to print any part thickness without infill. Many applications require the strength of solid metal, restricting the use of infill. This means strong solid parts suitable for more end-use applications.
More metals plus ceramics. Today, we offer 17-4PH and 316L stainless steels, but other metals and ceramics are on the way and are simple to swap out with our HydroFuse™ canisters.
Our printer is as easy as an entry-level plastic system. Our software is a breeze and the process mirrors printing plastic. All of our metals are bound in our paste, so there’s no loose powder.
Completely office safe and office friendly. By eliminating 98% of the binders, we also eliminate debinding odors in the office. Our process has no solvents, no fumes, no odors or no need to dispose of waste polymer.
Highly affordable. When you eliminate binder, you eliminate a debinding unit and expensive solvents.
Limited need for hydrogen or forming gas. Metal Designlab sinters some common metals, such as 316L, without any need for hydrogen or forming gas. It just uses a small amount of welding grade Argon, which is available anywhere at a fraction of the cost of other sintering gasses. Next to the metal, gas is the second largest expense in a sinter-based system.
First unveiled in 2019, this unique water-based technology unlocks a new world of opportunities for creating internal structures and intricate assemblies. Also, fully solid parts can be printed.
Step 1: Print
Step 2: Sinter
Once a part has been printed there is no need to debind before sintering. Parts printed with conventional three-stage processes need to be debound from the polymer binder. This step can take up to 50 hours, and requires boiling the part in a chemical solvent - a messy and dangerous process in an office. Other systems with a two-step process require a lengthy thermal debinding cycle that can take several days for a large part. The Rapidia process eliminates this step by using a water-based binder that is safe to handle and evaporates during sintering, saving time and mess.
Evaporative Supports. Rapidia is the only system that lets users print parts with complex internal structures, enabled by proprietary evaporative polymer/ceramic supports. Reduce wasted metal by up to 90%. Same evaporative support is also used as a separation layer when meal support is needed.
Hand Removable Supports. Metal supports are easily removable by hand, reducing post-processing time.
Water-Bonding. Join unsintered parts together to make complex assemblies, simply by wetting both parts and pressing them together.