TEKLİF İSTE
Teklif istediğiniz ürün ya da ürünleri seçiniz

RigiMill MT

RIGIMILL MT

3- 4- or 5-axis. Single spindle. Vertical moving table machine. Max part size: 240” x 61” x 32” (6,000 x 1,560 x 800 mm).

Options: Spindle power and torque, 3- 4- or 5-axis, tool magazine and tool holder.

Automation: Pallet system.

Materials: Cast iron, Aluminum, Titanium, Composite and Steel.

Industries: Aerospace, Heavy equipment and defense.

PRODUCT INFORMATION

The RigiMill Moving Table (MT) is the fixed-gantry plus moving table design, with identical bridge structure as the RigiMill Moving Gantry (MG). RigiMill MT provides the highest quality in precision and rigidity, with chip removal rates up to 55 cubic inches/min (0.9 liter) in titanium and 1,000 cubic inches/min (16.4 liters) in aluminum.

RigiMill MT is equally as compact as the RigiMill MG but requires less floor space. Its working envelope is suitable for shorter parts, up to 240” (6,000 mm) long. When offered with Modig standard pallet system, it has an impressive minimum foot print within a fully automatic palletized cell.

The RigiMill MT design includes a complete machine housing where the parts are processed into a fully covered working zone.

RigiMill MT is available in three sizes 80” (2,000 mm), 160” (4,000 mm) or 240” (6,000 mm).


SUCCESS STORY – MODIG AND ASCO INDUSTRIES

Asco Industries was looking for a precise finishing machine for titanium military airplane parts. The key characteristics were a robust and precise machine to ensure a good and stable quality output. From that viewpoint, MODIG provided a solution with the moving table gantry machine type.

The machine has proven to meet the required precision and is a good solution for the required capabilities, and we recently achieved 100% uptime with an average of 98%. 

HIGHLIGHTS

Up to 1,000 cubic inches (16.4 liters) of chip removal per minute in aluminum

Up to 55 cubic inches (0.9 liter) of chip removal per minute in titanium

RigiMill Moving Table provides highest quality in precision and rigidity

Industry leading spindle performance

Most-rigid compact gantry in the world

Roughing and finishing in the same machine

Increased productivity per square foot higher than competitors

Cycle time reduction is generally 40% over multi spindle machines – per part!

Feed rate of 2,800” per minute in all axis

Automatic pallet system up to 240” (6,000 mm)

Full automation options available

Balluff chip system for cutting tool identification

Accelerations, X-Y-Z-axes 26 ft/sec² (8 m/sec²)

Small footprint

Robotic tool loading with tool magazine up to 100 tools

Fully enclosed with implemented safety functions

Download Product Info