IP60-30 Waterjet Pump

The IP60-30 is designed for shops that desire the reliability of a hydraulic intensifier pump, but have limited power. This pump is capable of producing 0.6 gpm (2.3 lpm) of UHP water at a continuous operating pressure of 55,000 psi. It includes a hydraulic accumulator to provide smoother hydraulic pressure, reduce spikes, and prolong hydraulic pump life.

Construction

•  Heavy gauge sheet metal covers
•  Rugged all steel welded framework
•  Hinged cover & quick remove access covers
  
  

• UL Certified electrical panel
•  Safety shutdown systems
• Automatic safety pressure bleed-down valve
  
  

Intensifier Pump

• Single, 1 quart (0.9 liters) attenuator
•  Single piston, dual plunger, reciprocating pump
•  Rated pressure: 60,000 psi (4100 bar)
•  UHP flow rate: 0.6 gpm (2.3 lpm)
•  Max rated orifice size .010 in (.25 mm)
  
  

• Motor output: 30 hp (22 kw)
• TEFC NEMA premium efficiency motor
• Full load amps @ 460vac: (60Hz) 37
• Full load amps @ 230vac: (60Hz) 74
  
  

Size

• Length: 72 in (1,880 mm)
• Width: 32 in (940 mm)
• Height: 53 in (1,350 mm)
• Approximate weight with fluid: 2150 lbs. (975 kg)
  
  

Water/Enviornment

• Low-pressure water supply requirement 1.2 gpm (4.5 lpm) @ 60 psi (4.1 bar) min.
•  Max temp 70ºF (21ºC)
•  Ambient temperature: 50-100ºF (10-37º C)
  
  

• Axial piston, variable displacement, pressure-compensated hydraulic pump
• Thermostatically-controlled cooling loop
• Hydraulic accumulator prolongs component life and improves output quality
• Reservoir capacity: 30 gallons (113 liters)
  
  

Warranty

• 1-year or 2,000-hour pump warranty
• 2-year or 4,000 hour hydraulic circuit warranty
• Lifetime factory product training