Teklif istediğiniz ürün ya da ürünleri seçiniz


Composite Manufacturing

Electroimpact has developed Automated Fiber Placement (AFP) technology that allows cutting and adding within customer end placement tolerances at rates up to 2000 IPM over ramped, complex surfaces. All layups can be performed in a fully bidirectional manner with operator control over the feed rate with no effect on end cut accuracy.

The Electroimpact Modular Head AFP features:

Fully modular, quick change heads with 30 second automatic head change
Off line material loading for highest capital utilization
Off line cleaning for highest capital utilization
Allows multiple material forms on the same part (1/4” or 1/8” AFP in high contour areas, 1/2” or wider in low contour areas) for highest possible productivity
Simple, reliable 36” long tow path independent of machine configuration and reachable at ground level
Simple passive backing film removal
100% no-twist operation
100% no splice breakage
Fully bi-directional operation
Process and material use monitoring
Part specific machine designs possible with no impact on the core AFP technology or tow path
Programmed via VERICUT Composite Programming and Simulation Suite provided by CGTech

Web sitemizdeki çerezleri (cookie) kullanıcı deneyimini artıran teknik özellikleri desteklemek için kullanıyoruz. Detaylı bilgi için tıklayınız.
Kabul Et